Naran 80 Carbon Wheels

$1,100.00
+

DT Revolution laced wheelset of Naran carbon rims to Sarma hubs ready for racing and fun.  Special final layer provides additional damage protection. Our double wall construction helps to achieve optimal weight, stiffness and durability. Dual wall construction and  rim weight of 650g is optimum, which came from hundreds of different tested variants. These rims are easy to run tubeless at low pressure. Naran wheelsets are the best money upgrade you can make on your bike.

FEATURES:

Width: 80 mm Weights: Front: 135mm=1100gm Rear: 170mm=1230gm, 190mm=1250 gm
Type of drilling centered. (32 holes, spoke holes offset ± 11 mm)
Compatible to run tubeless. 
Drilled for Presta valve.

REVIEWS:

These wheels are not a trivial investment, but the initial quality, demonstrated durability, and dramatic weight reduction all combine to make them a solid value. Get a pair–you won’t be disappointed! 
http://www.singletracks.com/

The massive reduction in rotating weight is instantly noticeable. Acceleration is snappier, steering is easier, and it reduces the gyroscopic effect exhibited by most fat wheels at higher speeds. 
http://www.singletracks.com/

I laced up these wheels about 4 months ago and I haven’t had any issues with the set up. I was a bit cautious at first with the carbon rims, but after riding them pretty hard in a variety of conditions, the Naran’s have held up extremely well. They have solid construction and although the double wall rim is built for weight savings it can stand up a beating. 
http://www.fyxation.com/

Jim has been riding the Sarmas for both fun and for his urban commute. After several rides he reported that the the rims basically disappear and simply do their job. He’s been running between 10 and 15psi depending on where and how he is riding. 
https://fat-bike.com

Specs rims/wheels

ERD:
534mm
ERTRO:
559mm
Recommended tire pressure:
10-15PSI
Max rider weight limit:
110kg
Max Spoke Tension:
100kgf
Recommended valve’s length:
35mm
Recommended width of tubeless tape:
50-65mm
Recommended spokes nipples:
12 mm